How To Use Ps4 Controller With Project64

• Welcome to Smashboards, the globe'due south largest Super Smash Brothers community! Over 250,000 Blast Bros. fans from effectually the earth have come up to hash out these peachy games in over 19 million posts!

  Y'all are currently viewing our boards as a company. Click here to sign up right now and showtime on your path in the Nail community!

Information technology appears that you are using advert block :'(

• Forums
• Past Smash
• Super Nail Bros. 64
• Smash 64 Word

Guide: Using A PS3 Controller On PJ64

• Thread starter Ganon007
• Start date May xiv, 2008

• #1

HOW TO Apply YOUR PS3 CONTROLLER ON PJ64 (OR Any OTHER EMULATOR)

If your like me, you never used your PC as a game console until you establish out nearly Emulators. If thats true and then you probably haven't bought a decent game pad yet, well fret not considering if you have a PS3 Controller yous likewise tin accept a nice swell game pad to play your N64 Games on xD. Maybe some of you already know how to utilize a game pad on your emulator; thats all and good only using a ps3 controller is slightly dissimilar than whatever others so READ ON.

1. Getting Prepare
First you need to brand sure yous take a PS3 controller. I'm not certain information technology will piece of work with the Dual Shock 3 because I don't have i so no guarantees. You will also need a USB cable that will fit into the PS3 and your comp. I'm pretty sure your PS3 came with a cable like that =)

2. Download
Download this file here http://dl.qj.internet/SIXAXIS-commuter-for-PC-Tools-and-Utilities-PlayStation-three/pg/12/fid/11679/catid/518
Unpack it and put it some were you tin can find it.

3. Setting Upwardly
And so you got everything you demand, all you lot demand now is to claw it upward. Plug in your USB cablevision to your computer and so plug information technology into the PS3. The lights should start blinking. Side by side run the program you downloaded ONCE. Adjacent open your control panel click on Printers and Other Hardware then click on Game Controllers. Select the logical controller (PLAYSTATION(R)3 Controller) and so click on Properties. Click on the Examination Tab and well do similar the tab says and test it out. Printing all the buttons and motion the joysticks effectually to make sure everything is working correctly. IF nothing happens when your pressing buttons, printing the PS button ONCE and that should practise it.

4. Configuration
Next you volition try it out on your emulator. Y'all should use N-Rage'southward or Jabo'southward DirectInput as your controller plugin (they come with PJ64 i call up) or any other plugin that allows Game Pads.

N-Rages Plugin: Open up your Project64 and get to Options > Configure Controller Plugin. Click on the Devices Tab and on the Device Driblet-Down box select PLAYSTATION(R)3 Controller. then map the buttons to your liking. Salve profiles then yous can have diffrent layouts for diffrent games.
Jabo's Plugin: Open up your Project64 and go to Options > Configure Controller Plugin. Click on the drop downward box and select your controller (PLAYSTATION(R)3 Controller) and and then all you need to do is map your buttons! Click on the the little box corresponding to N64 button and map it to a logical button on your PS3 controller. Hitting OK and your done!

5. Conclusion
I made this for PJ64 but I'chiliad pretty certain you tin can use your command on any other emulator equally long as information technology has a plugin that allows external game pads. Take Fun!

• #2

3. Setting Up
So you got everything you demand, all yous demand now is to hook it upward. Plug in your USB cable to your computer then plug it into the PS3. The lights should kickoff blinking. Side by side run the program yous downloaded In one case. Next open up your control console click on Printers and Other Hardware then click on Game Controllers. Select the logical controller (PLAYSTATION(R)iii Controller) and and then click on Backdrop. Click on the Test Tab and well practise like the tab says and test information technology out. Press all the buttons and motility the joysticks around to make sure everything is working correctly. IF aught happens when your pressing buttons, press the PS button In one case and that should do it.

Yous say to run the prgram only Once (very important step due to capitals?) withal i accept been playing with a PS3 controller for a while at present and what i detect about effective is to click the Dos prgram every bit many times every bit possibul earlier it loads (this wil make information technology load several but they all go away quickly) and i also find it works best if yous printing the Middle ps logo button while doing this.

P.S.: I am being very serious, i had prioblems before with my contoller and i have found this the best way to keep it consistent

• #3

i have been playing with a PS3 controller for a while now and what i find most effective is to click the Dos prgram every bit many times as possibul earlier it loads (this wil brand it load several just they all go abroad quickly) and i besides discover it works best if you printing the Middle ps logo push button while doing this.

Actually? I never really encountered any problem. I commonly plug it in, run the program, and printing the PS push and that does it for me. Well if it works for you and then keep doing that!

• #5

Why would you use a PS3 controller for smash?

• #6

Why would you use a PS3 controller for blast?

because its better then my Logitec controller, and im to lazy to ordera Adapter, so itll do

• #vii

Why would you use a PS3 controller for blast?

why not? It's a skillful alternative IF you don't accept another game pad or adapter. It beats the keyboard (debatable) thats for certain >_>.

• #viii

PS3 controllers cost more then adapters anyways. And so instead of buying a ps3 controller, just fork out 10-20 bucks for an adapter.

If its because you have a PS3 already then y'all probably take enough money for a 20 dollar adapter anyways. Adapter >>>>>>>>>>>>>>>>>>>>>>>> PS3 controller.

• #ix

What if you don't take a N64 controller? Then you lot would spend more coin to buy one. And WHY would you buy the adapter if yous can use your PS3 controller with my guide? 8)

Joined

Feb 1, 2007

Messages

504

• #10

Information technology would exist actually impressive if you got the SixAxis features to work with Smash. Hah.

• #xi

What if you don't have a N64 controller? Then you would spend more than money to buy one. And WHY would you buy the adapter if you can use your PS3 controller with my guide? 8)

Well guessing you already have a PS3, so you should accept plenty of money anyways.

And you would buy an adapter + N64 controller instead of using a ps3 controller because its a Fashion meliorate controller for nail XP

• #12

Well guessing yous already have a PS3, then yous should have plenty of money anyways.

And you lot would buy an adapter + N64 controller instead of using a ps3 controller considering its a WAY amend controller for smash XP

Well you see therein lies the trouble. My bro bought it with his credit bill of fare. Stupid, yeah i know.

I never actually liked the N64 controller anyway then I estimate its good for me =P. Its pretty much the aforementioned anyhow. The stick is more responsive and its less awkward to hold. The C-Buttons are mapped to my Right Analog stick so there's no conflict there. Its also easier to taunt, which is very important! xD

It would exist really impressive if you got the SixAxis features to work with Boom. Hah.

Non yet my friend. Not Notwithstanding .

• Forums
• Past Boom
• Super Boom Bros. 64
• Smash 64 Discussion

• This site uses cookies. By standing to use this site, you are agreeing to our utilise of cookies.

How To Use Ps4 Controller With Project64,

Source: https://smashboards.com/threads/guide-using-a-ps3-controller-on-pj64.169273/

Posted by: hernandezsque1951.blogspot.com

Share this post